Specialist Underfloor Heating Installers
Underfloor Heating Installation & Design
Enjoy even, efficient warmth from the ground up. Ryt-Source Mechanical design and install wet underfloor heating systems across Essex — from single rooms to whole-house installations.
Get a Free QuoteThe Smarter Way to Heat Your Home
Underfloor heating distributes heat evenly across the entire floor surface, eliminating cold spots and the need for radiators. The result is a more comfortable living environment, cleaner wall space, and — particularly with wet systems — lower running costs than conventional radiator heating.
Our engineers design each system to suit your property, floor construction, and heat source. Whether you're fitting underfloor heating as part of a new build, a full renovation, or a single room upgrade, we'll specify the right system and install it to the highest standard.
Book a Survey
Wet & Electric Systems
Wet (Hydronic) Underfloor Heating
Wet underfloor heating circulates warm water through a network of pipes connected to your boiler or heat pump. It operates at lower flow temperatures than radiators, making it highly efficient — particularly when paired with a heat pump. We install all five wet system types, covering every floor construction from new-build screed to timber retrofit.
Grooved Boards
Pre-routed timber or insulation boards with channels machined to accept the pipe. The boards are laid on the subfloor and the pipe is pressed into the grooves, providing a stable, low-profile installation without the need for screed. Ideal for timber floors and retrofit projects.
- Low profile — minimal floor height increase
- No screed required
- Suitable for timber and engineered subfloors
- Fast installation — pipe clicks directly into routed channels
- Compatible with engineered wood, LVT, and tile finishes
- Good option for retrofit and renovation projects
Spreader Plates
Aluminium heat emission plates are fitted beneath or between the floor finish to conduct and spread heat evenly from the pipe across the floor surface. Particularly effective under engineered wood and LVT, where direct contact with the aluminium maximises heat output.
- Excellent heat distribution across the floor surface
- Very low profile — minimal height increase
- Fast response time
- Ideal under engineered wood and LVT
- Can be installed above or below the subfloor
- Suitable for room-by-room retrofits
Castellated Panels
Insulated panels with a raised castellated surface that the pipe clips between, holding it securely in position before screed is poured over the top. The insulation layer beneath the pipe ensures heat is directed upward efficiently, reducing heat loss to the subfloor.
- Pipe held securely between castellations — no additional fixings
- Integral insulation reduces downward heat loss
- Designed to be encased in screed
- Ideal for new builds and ground floor slabs
- Consistent pipe spacing for even heat distribution
- Compatible with liquid screed and sand-and-cement screed
Clip Track
Plastic track strips are fixed to the insulation or subfloor at set intervals, and the pipe clips into the track to maintain precise, consistent spacing. A versatile system that works with both screed and dry installations, and is well suited to irregular room layouts.
- Precise, consistent pipe spacing
- Flexible — adapts easily to irregular room shapes
- Compatible with screed and dry overlay installations
- Quick to lay out and adjust on site
- Suitable for new build and retrofit
- Works with a wide range of pipe diameters
Staples
The pipe is fixed directly to an insulation board using staples or U-clips at regular intervals before screed is applied. A straightforward and cost-effective method for larger areas, particularly in new-build ground floors where speed of installation is important.
- Simple and cost-effective for large areas
- Fast installation on new-build ground floors
- Pipe fixed directly to insulation board
- Designed to be encased in screed
- Flexible pipe spacing to suit room layout
- Suitable for liquid screed and sand-and-cement screed
Wet & Electric Systems
Electric Underfloor Heating
Electric underfloor heating uses a heating mat or cable laid beneath the floor finish. It is quicker and less disruptive to install than a wet system, making it ideal for single-room upgrades, bathrooms, and retrofit projects where connecting to the central heating system is not practical.
- Minimal floor height increase
- Ideal for bathrooms, kitchens, and single rooms
- Quick and clean to install
- No pipework or manifold required
- Compatible with most floor finishes
- Smart thermostat control available
When is electric the right choice?
Electric systems are best suited to single rooms or areas where connecting to the central heating system would be impractical or disproportionately expensive. Common applications include:
- Bathrooms and en-suites
- Kitchen and utility rooms
- Extensions where wet pipework is not accessible
- Conservatories and garden rooms
- Retrofit projects with limited floor void
Why Choose Underfloor Heating?
Underfloor heating offers a range of practical and comfort advantages over conventional radiator systems.
Even, Comfortable Heat
Heat rises uniformly from the entire floor surface, eliminating the cold spots and draughts associated with radiators and creating a consistently comfortable environment.
Lower Running Costs
Wet underfloor heating operates at lower flow temperatures than radiators — typically 35–45°C — making it significantly more efficient, especially when paired with a heat pump.
No Radiators
Freeing your walls from radiators opens up more space for furniture and interior design, and removes the risk of burns from hot surfaces — ideal for families with young children.
Compatible with Heat Pumps
Wet underfloor heating is the ideal partner for an air source or ground source heat pump, allowing the system to run at its most efficient low-temperature output.
Reduced Dust Circulation
Unlike radiators, which create convection currents that circulate dust and allergens, underfloor heating warms the room gently with minimal air movement — better for allergy sufferers.
Works Under Most Floor Finishes
Underfloor heating is compatible with tile, stone, engineered wood, laminate, and most vinyl finishes — our engineers will advise on the best combination for your project.
Interested in Underfloor Heating?
Get in touch for a free, no-obligation survey and quote. Our engineers will assess your property and design the right system for your needs, floor construction, and heat source.
Get a Free QuoteGot a plumbing or boiler emergency? We cover Essex & London 24/7.
Emergency Plumbing & Boiler Breakdowns